- HOW DOES CLOVER BOOT LOADER WORK INSTALL
- HOW DOES CLOVER BOOT LOADER WORK PC
- HOW DOES CLOVER BOOT LOADER WORK ISO
- HOW DOES CLOVER BOOT LOADER WORK DOWNLOAD
- HOW DOES CLOVER BOOT LOADER WORK WINDOWS
HOW DOES CLOVER BOOT LOADER WORK WINDOWS
I assume you’d want both, because the drive on the 970 product page, if an EXE file, will be a Windows driver. As always, if you need me to clarify anything, let me know in the comments. The steps involved can take a while, but they are quite simple to follow. This has been a slightly longer post, but I hope it is useful. Once installed, your OS will appear in Clover’s boot menu, where you can boot it. As such, I won’t really cover this here, but as long as you start the installation media from Clover (especially if you’re installing Windows), it should all work as usual. This varies depending on your setup, whether you’re installing Linux or Windows, or whether you’re cloning an existing disk.
Your installation media will appear in Clover’s boot menu.
HOW DOES CLOVER BOOT LOADER WORK INSTALL
You’ll be presented with a boot menu, and you should now install your operating system. You may need to select the USB stick as a boot device in the firmware setup, or it may just boot from it automatically. Now you can safely eject your USB stick and boot the new machine from it. These locations are similar for rEFInd if I recall correctly. Once you’ve got your driver, navigate to your USB drive and place it in
HOW DOES CLOVER BOOT LOADER WORK DOWNLOAD
You can search for “NvmExpressDxe.efi”, or you can download this one that I used, and have tested to work. Once written to your USB stick, you’re almost done but first you need to download the NVME driver.
HOW DOES CLOVER BOOT LOADER WORK ISO
You want the ISO or “USB flash drive image” option, which you can then write to the disk using a tool like GNOME Disks (Linux), Rufus (Windows), or Etcher (all OSes). You may need 7-zip on Windows to extract this.Ĭlover can be downloaded from, and Refind can be downloaded from. You also only need a small USB stick – an old 512 MB or 1 GB stick will be just fine.ĮDIT: You can download an image I made to then write to your USB stick with no further steps from. This sounds a bit complicated, but it’s easy to set up. With the right driver, Clover can then detect your new SSD and boot from it.
HOW DOES CLOVER BOOT LOADER WORK PC
There are a number of solutions to this problem, but the safest one (and the one I chose), is to install Clover to a USB stick, and have the PC use that as a boot menu. If you want to boot from the drive, you’ll probably now encounter another problem: when you power on, your system won’t “see” the drive as a boot device. Yes, it looks a bit ridiculous XD The access lights on the back of the PC with the card installed Booting from the NVME SSD Unscrewing the side-panel screw The inside of the case The adaptor card inserted into my GPU cage. Note that you’ll need to insert your NVME SSD into the card first. The process varies depending on your case, but it’s usually as simple as taking the side panel off your case, removing a blanking plate, and then inserting and screwing the card in. I don’t have detailed steps for your system, but I can show you how it worked on mine. Installing the adaptor is usually pretty easy. In the end, I went for this one because it was cheap and it looked like I could boot from it – some other adaptors have caused problems with this. In order to connect an M.2 drive to a PCIe slot, there are various adaptors available. If you’re using a standard ATX motherboard, you may well have multiple PCIe slots, but in my case I had to ditch the graphics card, which was an acceptable compromise for me because I wasn’t using it anyway. Fortunately, any recent desktop will use PCIe for the graphics card, and my old PC was no exception. I was really interested in the PCI Express/PCIe drives. So first I should point out that some M.2 drives actually use SATA, but I wasn’t interested in those as I could just connect a SATA SSD. You’ll see reference to rEFInd in the comments, but this is because I somehow got confused and thought I was using rEFInd instead of Clover. Similar steps can be followed for rEFInd, but that will only boot EFI/UEFI-based systems, whereas Clover can boot both BIOS and EFI/UEFI systems.
This will work for booting both Windows and Linux, on systems with either BIOS or EFI/UEFI firmware. Fortunately, there is a way to get these super-fast storage devices working on older desktop PCs (unfortunately this won’t work on laptops).
The old PC (an Alienware X51 R2) didn’t have a M.2 slot to accommodate an NVME drive, which is common on systems of that age (circa late 2013). NVME SSDs were quite cheap at the time, so I got myself a second hand 500GB Samsung OEM one commonly found in laptops. TileYSpace 56.Back in October when I set up my new Ryzen PC, I thought it might be good to get an NVME SSD for the older desktop as well – I’d pinched all the drives from it for the new PC, and I didn’t want to be stuck using my old, slow HDD. Origination 55.ĭesignWidth 55.ĭesignHeight 55.
0 kommentar(er)
